Tables
Tall Table - Shedua, Figured Maple, Port Orford Cedar.
approx. 4'W x 14"D x 42"T
I still need to make two drawers that will slide on the stretchers. They will be figured maple with a cedar lining.
Purpleheart Coffee Table - Purpleheart, Birdseye Maple
approx. 4'W x 14"D x 18"T
This is the one that started it all. I wanted to make a coffee table using a single wide piece of lumber adding simple legs. The ends are purposly left out of square
but the legs were adjusted to remain flush on the ends. I wish I had a better pictures, I made two of these out of a longer board. The wood is naturally purple but I added a purple stain to it to protect the color.
Mahogany Coffee Table - Mahogany, Figured Maple.
approx. 4'W x 20"D x 19"T
The mahogany slab used was the leftover piece from making veneer slices. It is roughly 1" thick and rough on the underside. Entirely made with handtools.
Walnut Slab Coffee Table - Claro Walnut, Quilted Maple, Walnut, Brass Rod.
approx. 4'W x 25"D x 18"T
The slab was smoothed by hand with some of the natural curves remaining. I had an idea to use 3 different materials for 3 different legs.
